The VM600 Slimline is used to house hardware from Vibro-Meter’s VM 600 series of machinery protection systems and condition monitoring systems. This rack is particularly suitable for industrial environments, where equipment must be permanently installed in 19" cabinets or panels. Each rack has a standard height of 1U and provides mounting space for one VM 600 series card.
MPC 4
The MPC 4 Machinery Protection Card is the central element in Vibro-Meter’s VM 600 series Machinery Protection System. This very versatile card is capable of measuring and monitoring up to 4 dynamic signal inputs and up to 2 speed inputs simultaneously.
IOC 4T
The IOC 4T Input / Output Card acts as a signal interface for the VM 600 series MPC 4 (Machinery Protection Card). It is installed in the rear of the ABE 04X rack and connects directly to the rack backplane via two connectors.
AMC 8
The AMC 8 and IOC 8T cards are designed for use in Vibro-Meter’s VM 600 series of machinery protection equipment. The AMC 8 analog monitoring card is installed in the front of the ABE 04X rack. The IOC 8T input/output card is installed in the rear of the rack. Both cards connect directly to the rack’s backplane via two connectors.
The cards provide eight channels of temperature monitoring, accepting both Resistance Temperature Detector (RTD) and Thermocouple (TC) temperature inputs, as well as process inputs. The source for each channel can be selected during the cards’ configuration.
IOC 8T
The AMC 8 and IOC 8T cards are designed for use in Vibro-Meter’s VM 600 series of machinery protection equipment. The AMC 8 analog monitoring card is installed in the front of the ABE 04X rack. The IOC 8T input/output card is installed in the rear of the rack. Both cards connect directly to the rack’s backplane via two connectors.
The cards provide eight channels of temperature monitoring, accepting both Resistance Temperature Detector (RTD) and Thermocouple (TC) temperature inputs, as well as process inputs. The source for each channel can be selected during the cards’ configuration.
RLC 16
The RLC 16 Relay Card is designed for use in Vibro- Meter’s VM 600 series of machinery protection systems and condition and performance monitoring systems. It is an optional card, for use when the 4 relays on the IOC 4T input/output card are insufficient for the application and additional relays are required.
MPS Software
MPS1 and MPS2 allow stand-alone configuration of MPC 4 and AMC 8 cards, via the cards' serial connectors. Alternatively, if the cards are installed in a networked VM600 rack, i.e. one containing a modular CPU card (type CPU M) used for rack control and communication, they can be configured in "one-shot" mode using an Ethernet TCP/IP link from the PC to the CPU M.
VM600 Portable
The VM600 Portable is intended for use in industrial environments where the portability and ruggedness of the system are essential, and when a permanent installation is not required.
VM600 System
The VM600 is a digital, modular, scaleable hardware and software solution for Plant Usage Optimization, providing integrated machinery protection, condition and advanced performance monitoring from a single source.
Data sheets