CP dynamic pressure sensors

Home » Products

are qualified by major OEMs for gas turbine combustor pulsation monitoring. The CP series use Vibro-Meter’s acceleration compensation patented technology, and reach the highest sensitivity in the industry (over 750pC/bar). They have an extreme temperature capability (up to 777°C) and a very high frequency response range (up to 15 kHz). Vibro-Meter’s CP sensors are key to optimizing low NOX emissions.

CP 103

Very high temperature dynamic pressure sensor. Similar parts are standard with numerous OEMs.

232pC/bar (20bar)

Overload up to 250 bar

-196 to 700°C

2 to 10'000 Hz

CP 211

Very high temperature, compact dynamic pressure sensor. Mostly used for laboratory measurements in extreme environments.

25pC/bar (250 bar)

Overload up to 350 bar

-196 to 777°C

2 to 15'000 Hz

CP 216

High temperature, compact dynamic pressure sensor. Similar parts are standard with numerous OEMs.

200pC/bar (250 bar)

Overload up to 350 bar

-70 to 520°C

2 to 15'000 Hz

CP 235

High temperature, very high sensitivity dynamic pressure sensor. Similar parts arestandard with numerous OEMs.

750pC/bar (20 bar)

Overload up to 100 bar

-55 to 520°C

2 to 10'000 Hz

System overview

Qualification & quality assurance

The quality and reliability of Vibro-Meter’s products has been widely recognized since our entry into the aviation sector in the 70’s. This is when our Quality System was put in place. Our latest BS EN ISO9001:2000 certification was awarded in April 2007.